CPT-E01 - TMS320F2810 Processor Board

PCB CPT-E01

The CPT-E01 is a low cost, high performance MCU based inverter controller that has been designed for applications requiring a single board solution to control an inverter power stage. The board has a flexible TTL level gate driver interface that supports up to 16 off card gate drivers. 

The board supports a Texas Instruments TMS320F2810PBK or TMS320F2811PBK MCU controller, which has been specifically developed for use in digital motor/motion control applications, and contains on-card all necessary functions for a complete standalone inverter control system.

Technical Specifications

 

  • On-card features include:
    • TMS320F2810PBK MCU processor
    • 64k x 16 Flash (128k x 16 Flash on TMS320F2811PBK)
    • 1k x 16 OTP ROM
    • 4k x 16 Boot ROM
      • Software Boot Tables
      • Standard Math Tables
    • 18K x 16 Single Access RAM (SARAM) made up of:
      • L0 and L1: 2 Blocks of 4K x 16 Each SARAM
      • H0: 1 Block of 8K x 16 SARAM
      • M0 and M1: 2 Blocks of 1K x 16 Each SARAM
    • Serial Flash Memory with 1Mbit of non-volatile storage
    • 4 off indication LEDs
    • 4 off DIP switches
    • 2 off isolated digital inputs
    • 2 off MOSFET switch isolated outputs
    • 1 off relay output, c/o contact
    • 3 off AC current inputs
    • 1 off DC current input
    • 3 off differential AC voltage inputs
    • 1 off differential DC voltage input
    • 1 off temperature sensor input
    • 3 off general purpose analog inputs (± 10V default)
    • 8 off complementary TTL level gate driver PWM outputs, with common fault interrupt and enable
    • 8 off complementary TTL level gate driver PWM outputs, available on the General IDC Interface
    • Reset/Power-On Circuitry
    • Power LED
    • SMPS to generate all on-card supplies
    • Power supply operation from input +24VDC
  • The CPT-E01 card also supports the following peripheral interfaces:
    • JTAG interface
    • 1 off clocked Serial Peripheral Interface (also enables external Flash reprogramming)
    • 1 off 3.3V-TTL serial interface
    • 2 off isolated RS-485 serial interfaces (can be independently isolated)
    • IDC Header Containing:
      • 1 off Clocked Serial Communications Interface
      • 1 off Enhanced Controller Area Network (eCAN)
      • 1 off Event Manager
  • Dimensions:
    • 213mm x 180mm (8.39" x 7.09")

Peripherals

 

  • CPT-E02 - 3 Phase Semikron Skyper32Pro Gate Driver Board
  • CPT-E10 - 3 Phase Isolated HCPL-316J Based Gate Driver Board
  • CPT-E14 - Generic Analogs Adaptor Board - Solder in to CPT-E01
  • CPT-E49 - 5 Phase Isolated HCPL-316J Based Gate Driver Board
  • CPT-E50 - 3 Phase Semikron Skyper32Pro Gate Driver Board
  • CPT-COM - TTL Level Serial Card to RS232/RS422/RS485
  • CPT-COM-U - TTL Level Serial to Isolated USB
  • CPT-JTAG - Isolated JTAG Interface

Downloads