CPT-DATS - DA Series Test/Development Platform


The CPT-DATS provides a development environment for the CPT-DA2810 TMS320F2810/11 and CPT-DA28035 TMS320F28035 MCU controller boards. The CPT-DATS board has an MCU Controller Interface and provides an on-card regulated power supply, non-isolated RS232 serial communications interface as well as 3.3V to TTL level translation interfaces.

In addition, the CPT-DATS board can be configured to provide a fully automatic test environment for either the CPT-DA2810 or CPT-DA28035 circuit boards.

The CPT-DATS board provides buffering and signal conditioning for digital signals to the MCU Controller Interface. This includes level-shifting of the digital I/O between the MCU Controller Interface 3.3V and the external TTL level (5V).

All analog signals are passed directly through to the MCU Controller Interface.

Technical Specifications


The CPT-DATS board requires a CPT-DA2810, or equivalent, MCU processor card to operate.

  • On-card facilities include:
    • 16 off buffered complementary TTL-level gate driver PWM outputs
    • common fault interrupt and enable
    • 8 off TTL-level individually configurable digital I/O bits, with common interrupt
    • 7 off TTL-level interrupt and capture port inputs
    • 2 banks of 6 off 12-bit 0-3V ADC inputs
    • 2 off output LEDs
    • 2 off non-isolated RS-232 level serial communications port
    • 12V Power Supply Input
    • On-card voltage regulation
    • 1 off 80 way Connector
    • Containing:
      • 12 off 12-bit 0-3V ADC inputs
      • 2 off Serial Communications Interfaces
      • 1 off Enhanced Controller Area Network (eCAN)
  • Dimensions:
    • 173mm x 86mm (6.81" x 3.39")